Spray Foam Insulation Hillsboro TX

Spray Foam Insulation Hurst

Residential spray foam insulation in Hillsboro

If you are in the midst of building a new home or renovating your existing home then finding the ideal insulation for your Hillsboro home is one of the decisions that you will have to make. There are many options available to you. Some products are cheaper in the short term but don’t always give the best long lasting insulation solution.

Other products may be more expensive to buy but can save your pocket on your utility bills over time. It is useful to compare and understand the different types of insulation so you can make an informed decision that will benefit you in the long run.

The R value of Open and Closed cell spray foam

Insulation is rated according to an R-value. This refers to how effectively it slows down or reduces thermal diffusion-conduction. Open cell spray foam which has the lowest density has an R-value of 4. Most other types of spray foam have an R-value between 6 and 7.7. For instance, fiberglass batting has an R-value of 3.5.

Most samples of closed cell spray foam insulation have an R-value of 7 or greater. Open cell spray foam, which is acknowledged to have a lower density, has an R-value of 4 which still rates higher than other kinds of insulation. Spray foam can be evenly employed on a surface and even be inserted into hard-to-reach places to produce a tight seal over the area.

Among the reasons that spray foam is effective as an insulator is that the foam expands and can get into all the tiny cracks and crevasses in your home. Polyurethane spray foam is very effective in reducing thermal diffusion-conduction.

What is spray foam insulation?

Spray foam insulation is a product that has been around for some time. It is among the more efficient Hillsboro home insulation and available in a variety of kinds to suit various applications.

Spray foam comprises at least two compounds. Independently, the materials can be stored for a relatively long period; however, when the compounds are mixed, they react and form a foam that needs to be applied immediately.

The foam is sprayed onto a surface area and after a short period, it sets and hardens. The impact is an effective insulating layer that is long lasting.

Types of residential spray foam insulation

Open-cell foam insulation

Open cell is that type of foam in which the cells do not close completely. As the open-cell foam uses less number of chemicals, it is less costly. The foam acts as a barrier for, but cannot barricade water vapor. It has a sponge-like an appearance and can be used on the interiors walls of a home or building, as it causes a reduction in sound. The foam is not used for the outdoor applications.

Open cell spray foam consists of cells that do not completely seal themselves. This makes for a softer and less dense final product. Closed cell foam cells are completely sealed and closed compressed together, creating a denser and firmer final product. This also gives closed cell foam a higher R-value (measured unit of thermal resistance). These differences also affect the cost difference between the two types of insulation.

Closed-cell foam insulation

The closed cell foam has a high density that is much more than the density of the open-cell foam. The compact and smaller cellular structure of the foam can barricade both water vapor and air. The foam is used in the roofing projects and the outdoor uses but can be used in any area of the home. CPVC pipe fittings suppliers provide the closed-cell foams along with other equipment and make a home world-class in its architectural built.

Open-cell foam insulation cost

So how much will the open-cell foam insulation cost in Hillsboro? Just before you think about the amount of money you are proceeding to commit in these materials, determine very first the area of your house you want to be protected. This gives you an overview of the price range for the open-cell foam insulation cost.

An average price about $1,905 to insulate a standard home. This is more than half the price to install other sorts of insulation materials like the fiberglass insulation. Be reminded that the price of labor in installing these insulators cost more than the insulator material itself since you need to rely on professionals in putting in the open cell foam insulator.

The cost of the open-cell insulation is usually $0.44 to $0.65 per board foot.

Get the best price on spray foam insulation in Hillsboro TX. Give us a call today for a free quote to compare!

Dallas Insulation
3901 Arlington Highlands Blvd Ste 200
Arlington TX 76018
(817) 784-7747

 

Residential Spray Foam Insulation Service Area

More resources:

Thermal Insulation